D3G225IF1102

D3G225-IF11-02

EC centrifugal fan

Motor: M3G084-GF

Technical description
Weight 12.5 kg
Motor size 84
Size 225 mm
Rotor surface Painted black
Impeller material Sheet steel, galvanized
Housing material Sheet steel, galvanized
Motor suspension Motor mounted on brackets for one-sided vibration damping
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Moisture (F) / Environmental (H) protection class H1
Max. permitted ambient temp. for motor (transport/storage) +85 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Operation and alarm display - Tach output - Alarm relay - Integrated PID controller - Power limiter - Motor current limitation - PFC, active - RS-485 MODBUS-RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
EMC immunity to interference According to EN 61000-6-2 (industrial environment)
EMC circuit feedback According to EN 61000-3-2/3
EMC interference emission According to EN 61000-6-3 (household environment)
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal strip
Motor protection Thermal overload protector (TOP) internally connected
with cable Variable
Pollution degree 2
Protection class I (with customer connection of protective earth)
Conformity with standards EN 60335-1; EN 61800-5-1 / CE
Approval EAC