D3G160HA0402

D3G160-HA04-02

EC centrifugal fan

Motor: M3G084-DF

Technical description
Weight 7.8 kg
Motor size 84
Size 160 mm
Rotor surface Painted black
Impeller material Sheet steel, galvanized
Housing material Sheet steel, galvanized
Motor suspension Motor mounted on brackets for one-sided vibration damping
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Moisture (F) / Environmental (H) protection class H1
Max. permitted ambient temp. for motor (transport/storage) +85 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Operation and alarm display - Tach output - Alarm relay - Integrated PID controller - Power limiter - Motor current limitation - PFC, active - RS-485 MODBUS-RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal strip
Motor protection Thermal overload protector (TOP) internally connected
with cable Variable
Pollution degree 2
Protection class I (with customer connection of protective earth)
Conformity with standards EN 61800-5-1; EN 60335-1 / CE