| Weight |
24.2 kg |
| Motor size |
138 |
| Size |
800 mm |
| Rotor surface |
Cast in aluminum |
| Terminal box material |
PP plastic |
| Blade material |
Sheet aluminum insert, sprayed with PP plastic |
| Number of blades |
5 |
| Blade pitch |
0° |
| Airflow direction |
V |
| Direction of rotation |
Clockwise, viewed toward rotor |
| Degree of protection |
IP54 |
| Insulation class |
"F" |
| Ambient temperature note |
Occasional start-up between -40°C and -25°C is permissible.|For continuous operation at temperatures below -25°C (e.g. refrigeration applications) we recommend our fan design with special low-temperature bearings. |
| Moisture (F) / Environmental (H) protection class |
H2 |
| Max. permitted ambient temp. for motor (transport/storage) |
+ 80 °C |
| Min. permitted ambient temp. for motor (transport/storage) |
- 40 °C |
| Installation position |
Any |
| Condensation drainage holes |
On rotor and stator sides |
| Mode |
S1 |
| Motor bearing |
Ball bearing |
| Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) |
<= 3,5 mA |
| Electrical hookup |
Terminal box |
| Motor protection |
Thermal overload protector (TOP) with basic insulation |
| with cable |
Axial |
| Protection class |
I (with customer connection of protective earth) |
| Conformity with standards |
EN 60034-1 (2010); EN 61800-5-1 |
| Approval |
EAC / CSA C22.2 No. 100 / UL 1004-1 |
