EC axial fan

Motor: M3G200-LA

Technical description
Weight 121 kg
Motor size 200
Size 1250 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum, painted black
Blade material Die-cast aluminum, painted black
Support ring material Steel, galvanized and coated with black plastic (RAL 9005)
Fan housing material Sheet steel, galvanized and coated with black plastic (RAL 9005)
Number of blades 5
Blade pitch
Airflow direction A
Direction of rotation Counterclockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Moisture (F) / Environmental (H) protection class H2+A
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on top
Condensation drainage holes On stator side
Mode S1
Motor bearing Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameter setting) - External release input - Alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - EEPROM write cycles: 100,000 maximum - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from the mains - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box
Motor protection Reverse polarity and locked-rotor protection
Protection class I (with customer connection of protective earth)
Conformity with standards EN 61800-5-1 / CE
Approval CSA C22.2 No. 77 + CAN/CSA-E60730-1 / UL 1004-7 + 60730 / EAC