W3GZ50FC0401

W3GZ50-FC04-01

EC axial fan

Motor: M3G200-QA

Technical description
Weight 138 kg
Motor size 200
Size 1250 mm
Rotor surface Painted black
Electronics housing material Die-cast aluminum, painted black
Blade material Die-cast aluminum
Fan housing material Sheet steel, galvanized and coated with black plastic (RAL 9005)
Guard grille material Steel, coated with black plastic (RAL 9005)
Number of blades 5
Blade pitch
Airflow direction V
Direction of rotation Clockwise, viewed toward rotor
Degree of protection IP54
Insulation class "F"
Moisture (F) / Environmental (H) protection class F4-1
Max. permitted ambient temp. for motor (transport/storage) +80 °C
Min. permitted ambient temp. for motor (transport/storage) -40 °C
Installation position Shaft horizontal or rotor on bottom; rotor on top on request
Condensation drainage holes On rotor side
Mode S1
Motor mounting Ball bearing
Technical features - Output 10 VDC, max. 10 mA - Output 20 VDC, max. 50 mA - Output for slave 0-10 V - Input for sensor 0-10 V or 4-20 mA - External 24 V input (parameter setting) - Alarm relay - Integrated PID controller - Motor current limitation - PFC, passive - RS-485 MODBUS-RTU - Soft start - Control input 0-10 VDC / PWM - Control interface with SELV potential safely disconnected from supply - Thermal overload protection for electronics/motor - Line undervoltage / phase failure detection
Touch current according to IEC 60990 (measuring circuit Fig. 4, TN system) <= 3,5 mA
Electrical hookup Terminal box
Motor protection Reverse polarity and locked-rotor protection
Protection class I (if protective earth is connected by customer to the housing's connection point)
Conformity with standards EN 61800-5-1 / CE
Approval UL 1004-7 + 60730 / EAC / CSA C22.2 No. 77 + CAN/CSA-E60730-1